| |
Click here to view/download our Catalogue
Related Products:
Face Drivers for Grinding
Face Drivers for Gear Manufacture
|
|
FACE DRIVER FOR TURNING ®
CLAMPING FACE DRIVERS WITH INTEGRAL FLANGE ON SELF-CENTERING CHUCK
SOFT JAWS:
Preliminary operation to take up the axial and radial slack
of the self-centering chuck.
1st operation: machine the diameter D after clamping a round flange of suitable diameter in the three jaws.
2nd operation: Machine the diameter C after clamping the
appropriate ring in the diameter D.
For more details Click here to view our product Catalogue. See page 16.
FACE DRIVER 6/30 “SPECIAL” FOR TURNING
FACE DRIVER FOR TURNING WITH INTEGRAL FLANGE
FEATURES:
This face driver is suitable for machining shafts of between 6 and 30 millimetres in diameter. Machining with large tools can also be carried out from the face driver side; the center point and the driving pins can be replaced without having to remove other face driver components.
For more details Click here to view our product Catalogue. See page 19.
FACE DRIVER 15/55 “SPECIAL” FOR TURNING
FACE DRIVER FOR TURNING WITH INTEGRAL FLANGE
FEATURES:
This face driver is suitable for machining shafts of between 15 and 55 millimetres in diameter. Machining with large tools can also be carried out from the face driver side; the center point and the driving pins can be
replaced without having to remove other face driver components.
For more details Click here to view our product Catalogue. See page 20. |
|
